|
Single-phase/3 Phases/Multi-circuit Smart Power Meter
|
||||||||||
| Model | Phase | Loop | Bi-dir. Energy (Note 6) |
CT Included | Max. Voltage | Max. Current | Max. CT ID | Cable Length | ||
|---|---|---|---|---|---|---|---|---|---|---|
| RS-485 (Modbus/RTU) |
Ethernet (Modbus/TCP) |
CAN bus (CANopen) |
||||||||
| PM-3112-xxx | PM-3112-xxx-MTCP | PM-3112-xxx-CPS | Single | 2 | N/A | Yes | 300 V | 200 A | 24 mm | 1.8 m |
| PM-3114-xxx | PM-3114-xxx-MTCP | PM-3114-xxx-CPS | 4 | |||||||
| PM-2133D-xxxP (with LED Display) |
PM-2133D-xxxP-MTCP (with LED Display) |
- | Three | 1 | Yes | Yes | 500 V | 400 A | 36 mm | 4 m |
| PM-3033 | PM-3033-MTCP | PM-3033-CPS | Three | 1 | Yes | N/A | 500 V | 5 A | N/A | N/A |
| PM-3133-xxx | PM-3133-xxx-MTCP | PM-3133-xxx-CPS | Three | 1 | Yes | Yes | 500 V | 400 A | 36 mm | 1.8 m |
| PM-3133-xxxP | PM-3133-xxxP-MTCP | PM-3133-xxxP-CPS | 500 V | 4 m | ||||||
| PM-3133i-xxxP (Note 5) |
PM-3133i-xxxP-MTCP | PM-3133i-xxxP-CPS | 600 V | 4 m | ||||||
| PM-3133-RCTxxxxP | PM-3133-RCTxxxP-MTCP | PM-3133-RCTxxxP-CPS | Three | 1 | Yes | Yes | 500 V | 4000 A | 185 mm | 4 m |
| PM-4324-xxxP (1 main circuit) |
PM-4324-xxxP-MTCP (1 main circuit) |
PM-4324-xxxP-CPS (1 main circuit) |
Single/ Three |
24/8 (Note 4) |
Yes | Yes | 500 V | 400 A | 36 mm | 4 m |
| PM-4324A-xxxP (1 or 2 main circuit) |
PM-4324A-xxxP-MTCP (1 or 2 main circuit) |
PM-4324A-xxxP-CPS (1 or 2 main circuit) |
500 V | |||||||
| PM-4324D-xxxP (with LCD Display) |
PM-4324D-xxxP-MTCP (with LCD Display) |
PM-4324D-xxxP-CPS (with LCD Display) |
600 V | |||||||
| Note 1: Maximum CT cable length can be extend to 8 m. (except for Rogowski Coil CT), and the accuracy does not decrease. [We suggest to use twisted pair cable AWG18-14, sectional area from 0.75 ~ 2.0mm2.] Note 2: The end of power meters with -xxx or -xxxP means the specification of the CT. Users can choose the suitable one based on difference of current range and cable section area. Note 3: The end of power meters with -xxxP, the P means CT has built-in circuit protection to prevent CT from secondary open-circuit danger to human. Note 4: The PM-4324A has 2 separate main circuit inputs that can use in the different power system. Note 5: Built-in AC isolator protection, this means total isolation between the AC measurement side and the control side. Note 6: [Bi-dir. Engergy] stands for [Bi-directional Energy]. |
||||||||||